Combiner 1710-1880 and 1920-2170 MHz
-Low insertion loss
-DC and AISG Issue 2.0 Passthru on selected ports
-Mounting on wall or on poles in various dimensions
-Suitable for outdoor and indoor applications
Radio Frequency Components and Modules
Combiner 1710-1880, 1920-2170 MHz
-Designed for multi-band co-located sites |
1800 CHANNEL |
|
Pass-band | 1710 - 1880 MHz |
Insertion loss | 0.2 dB typical, 0.3 dB max |
2100 CHANNEL |
|
Pass-band | 1920 - 2170 MHz |
Insertion loss | 0.30 dB typical, 0.5 dB max |
GENERAL SPECIFICATION |
|
Impedance | 50 ohms |
VSWR / Return loss | 1.29 / -18 dB min, all ports |
Input power per channels | 250 W max average |
Passive intermodulation | < -110 dBm for two tones at downlink band, at 20W each |
DC/AISG |
|
Connection | Factory configurable see ordering information for details |
Max current | 2.0 A continuous, 4A peak |
Max voltage | ± 33V max |
OOK signal insertion loss (2.176 MHz) | 0.8 dB max |
OOK signal return loss (2.176 MHz) | 12 dB min |
Environmental rating | ETSI EN 300 019 class 4.1 |
Ingress protection | IP67 |
Lightning protection | ±5 kA, 8/20us, M6 earth stud fitted |
Operating temperature | -40 to +65ºC |
Altitude | 2000 meter max |
MTBF | > 500,000 hours |
EMC | ETS 300 342-3 |
Sketch dimensions (H x W x D) | 138 x 220 x 55 mm, single unit |
| 138 x 220 x 71.5 mm, single unit with bracket |
| 138x 220 x 130.5mm, double units with bracket |
Weight | 2.2 kg max., single unit |
| 2.6 max., single unit with bracket |
| 4.8 kg max., double units with bracket |
Surface treatment | Powder coating |
Bracket | Stainless steel |
Mounting | Pole / wall bracket supplied with two metal clamps for 46 mm min diameter poles |
Protection ground | M6 screw |
Connectors type | DIN 7/16 female, long barrel |
